胸が痛むから没心没肺まで

上記の広告は、30日以上更新がないブログに表示されています。
新たに記事を投稿することで、広告を消すことができます。  

Hello, I’m Kate, what I want to show you today is: my lettuce and the recently used LED VANQ light strip, output t8 to improve the level of hydroponic lettuce.

These are summer crisp varieties called Cherokee, which are very green here, but it should be a very red head of lettuce, so even if you use a different lighting method, it will not turn red. I have arranged it. However, I will show you in more detail that these top products have three light-emitting bars, each light-emitting bar uses 36 watts on top of the deep red blue LED, and I have 3, so a total of 108 watts , The average is about 17 watts, while the United States is 10 watts. The daily cost is US cents per degree, which is the national average. The kilowatt-hour cost where I live is only 7 cents, so the cheap area here has increased, and the place where you live on the second floor may also be cheaper. The fluff of the four Philips belts uses a total of 144 watts. Each growth level is 36 cents a day, and now there are 36 plants per growth level. As you can see, I used a high output t8 on the LED, so there are two LEDs in the row.

The three high outputs are two 5s, totaling 234 watts, or 37 cents per day for each growth level. At the bottom, I only completed 5 high-output t8 lamps, totaling 270 watts and 43 cents per day, so obviously the cost of t8 far exceeds the level of LEDs, but I just want to show you that these LEDs are more expensive than those. The high operating costs of these LEDs. In fact, the size of the plant growing under the LED seems to be the best plant I have seen under t8. From here, I still can't see the bronze red, but this is from the t8 shelf, I will fix it to the C from four sides. Here, I put it here because you can. The t8 at the top is not very good and not very dense. It is very light, perhaps only a few ounces, and the performance of plants grown under four LEDs is much better. Pull it out and you will find that your head is very tight. I will put them on the counter so that you can observe the differences side by side. If you can see the compact sprinkler from the LED.

Opening t8 will let you know that this is just a loose head combination, so you know that trying to sell these heads in the farmers market, I will obviously make more money because of my weight, and I cannot sell this kind of lettuce , So the II finally had to cut these. I grew up under five and added salad dressing to illustrate the top tea. There are 3 factories under the LED grow lights, and the performance under these factories is very good. , They perform well in the front and rear directions, but if you notice a lot of light drops when we drive to the side here, they are stretching, we are at this level, you can see, or the LED lights here Do not brighten any expansion here to show, you can even see that the plant under the LED actually has the same thickness and density as under the LED, but it is back to the t8 side. The head is underdeveloped, so try to flatten it, and you will find that the plant on the left is just below t8. The camera under the LED is difficult to adapt to different lighting settings, but you can see that this is an LED, this is an LED. These plants are much larger than previous plants. Below t8, the upfront cost of these LEDs will make you pay more, but in the long run, you will be able to make more money from them.

Because you will become denser and the head of lettuce heavier, you have to really weigh your finances and figure out your ability to start using LEDs, or if you want to start some sort of arrangement, you can still produce instead of just Just to show the difference between lighting options and lighting high output t8 and LED layout, please subscribe to ask many questions, I will definitely provide feedback and continue to follow

  

I teach 10-12 grade agriculture courses in a high school, so I decided to let my students use LEDs to grow cucumbers in a controlled environment. Hydraulic grille lights. The light I choose for cucumber growth is VANQ T8 light, which can easily cover 2x2. The metal halide or high-pressure sodium lamp T8 with an area of ​​more than 400 watts uses 84 3 watt ultra-high output LEDs, with an expected lifespan of 12 to 15 days, a power of about 130 watts, and the patented six-belt cucumber plant with large leaves and beginning to bloom.



The cucumber I chose is a variety called pica lino. It can produce all female flowers without pollination, so it is very suitable for growing indoors or in a greenhouse on the 25th day. Due to powdery mildew, it has removed some leaves. Even with powdery mildew, the plant showed tremendous growth. I was surprised how many flowers bloomed in such a short time on the 30th day, there were no signs of powdery mildew, and many new leaves were replaced. Some cucumbers began to grow.

The armor-piercing T8 is worthy of the name, because it can penetrate many canopies and induce many flowers and flower buds to be actually loaded. Plant flowers and new buds within 25 days after transplantation. After the cucumbers are removed, they grow at an alarming rate. Picking on the 35th day took 7 to 10 days. We harvested the first batch of grapes and one of my students. In the end, we picked 8 cucumber dat from the vine, which was our last harvest, because the cucumber plant has completely exhausted its life and produced 191 cucumbers. My students and I like to eat fresh things. We also sell it to our employees. With the help of many other cucumber schools, we eventually raised $125 to maintain and support our indoor garden.

To my surprise, VANQ Hydroponic LED Grow Light T8 can produce 191 cucumbers in an area slightly larger than 4 square feet. In this region, the penetration cost of water and electricity growth T8 is $649 for three years. The 12-year warranty from the day the lights are turned on is only $54 per year. I can easily repay my money within 24 weeks. My class has 3 cucumbers provided by school staff, the price is 5.00 US dollars, they are organic seeds, we do not use any herbicides, pesticides or fungicides, our cucumbers increase the value and demand of our products, to us The demand is so great that I must start reducing the number of people who pay in advance to ensure that if we sell all 191 cucumbers, they will have the next right to pick them. They could have sold 63 bags of luggage for $5 and could raise $115 in 3 days and 80 days.



You can pay for these two cucumbers. After that, in the next 11 and a half years, for every cucumber planted, the school community association may be a non-profit organization, or even an individual, and a healthy and good organization. The high yield index of a plant is the number of days the roots have grown since the 1980s. The root system of cucumber is the healthiest root system. I see them very white. I am a pioneer in Sookie's contribution to VANQ growers because it generates almost no heat. To help me lower my body temperature, a lot of oxygen enters the VANQ spectrum. Insufficient light can also have a huge impact on plant health and high yields. Looking forward to buying more lights from VANQ from the classroom  

Okay, this is my hydroponic grow light bar on the Costco shelf. This is how they connect. So basically, if you look closely at the plus sign, there will be a plus sign and a minus sign, so there will be a plus sign there, so all you have to do is connect the red wire to the bidirectional black wire and use the minus sign Location, I'm tying them together here just to tell you not to shrink, so you just need to connect them like this, then shrink the wrap, then shrink the wrap and what I put here, and then align them. To keep everything smooth, I didn’t wear a zipper, but all I had to do was put the zipper every few inches to prevent us from falling and connecting together. For power supplies, this is really simple.



Our power source is a 12 amp power source. This line is just one line. You can connect three wires to the back of the computer or monitor. Black, white and green, so if you look here, the wire connecting L to black is white, and then the green wire is inserted here, so you can connect these three ways and loosen it, it's easy, you just need to loosen Open any one of the wires, then tighten to tighten the wires, put them in, here you will also see the VV plus sign, so you want the red wires to appear in these V Plus, and you need another root yes , Just like I started inserting it to tell you that this will be a lurking wait. I tell you, this is how you grow and make money. Okay, this is the shelf. As you can see, the red tie is installed. They stay bright now. I just want to tell you the difference between LED lights.




I installed an LED hydroponic light here. I want to shrink it a bit. If you notice a difference in height, there will be more space between this part and this part for fluorescent lights. In fact, the growth space for plants is relatively small. If you look here, you will find that these pea sprouts are now about 3-4 inches, they still have a lot of room to grow, so they need to be wired here again, so use v- and v+ as roots. Lifted his head in front of him. You demonstrated how to wire and then plug in the main power supply on the left. Just plug in my fluorescent lamp. The lamp here is connected to Yes, the main power supply is to ground the white wire to the end, and then ground the black wire to L. Then all the final Joe is installed here. I will 3D print it separately or just replace it from another shelf  

Hello everyone, this article will tell you that suspending grows brighter in growth, and guide you through different choices involving suspending, which can show the light footprint of our light intensity, which changes once and grows into this setting according to distance. The most common and easiest way is to attach a VANQ grow light. The LED growing light usually comes with a metal hanger with a metal ring at the end, and then a ratchet-type metal hanger is hung from the height-adjustable rope to provide space between the top and the tent and grow. The light so that he doesn’t stand up when he hangs the hanger. The light grows better than he wants. This is our favorite guide. Hang it on the top of the edge of the tent, and then combine them with the real The tent is connected again to project the adjustable ring ratchet can lower or lower the life base of the suspension type.

We need to show you two static pictures of different suspension alternatives with light intensity, so before you can hang it, this is the most important part of setting your total cost to face the correct height of the growing light in the laboratory. Recently, the stronger the light they will receive prevents us from measuring the number of micromoles per square meter per second in the previous picture with ppfd. We use the Apogee MQ 500 quantum meter for quantum sensors. We understand that most winemakers are here. In this case, there is no tool to directly measure the specifications of ppfd manufacturers. It is necessary to rely on small herbs and spices to grow well under low light of about 200 ppfd, and penetrating plants such as tomato pepper hemp that want more intense light hemp seedlings It usually requires 100 to 150 ppfd during the growth period of contemplative plants, and 300 to 500 PTFE 600 PPV or higher during the flowering period, assuming that all nutrient solution temperature and humidity and other conditions are also very suitable for adjusting light to suit your plant ppfd needs Adjust the light intensity by moving the growth light up or down, causing the value of planting light brands, but the theory is always the same. We mainly want you to understand the great influence of height on ppfd.

We see that the growth light of the fifth group is about 450 D when it reaches 2 feet, and if we drop to 1 foot we are far more than 1000 ppfd, which is the previous double multi-measurement. Another thing to consider is the area covered by the light footprint. With light, we now see that the sensor is almost at the bottom in the corner of the tent, and the closer light is still on or your plant canopy. When we move the light up, the tiny chance between the footprints will become that the photons it emits will spread In the size of the area, it is important to increase the light footprint, because it is necessary to provide enough life to provide you with this information to the plants at the edge of the total space. Hope you can better understand the flow of light and the way according to your plants and you Grow up to adjust your land

  

How lighting solutions can change the future of cannabis cultivation. The era of growing cannabis in the sun no longer exists. This is just manual management of the schedule. The reliance of large field cultivators on modern technology exceeds the cannabis production they have never improved. Thanks to cannabis growers in many states in the United States. Strive to increase output through innovation. In terms of revolutionizing the future of cannabis, lighting systems are among the top three.

It will grow under full-spectrum light in 2019. Each strain has specific lighting requirements, so finding a uniform light source every time you are busy is an ideal process. If you grow up with different types of advantages to solve this situation, industry experts have realized that you need not only a factory with a LED grow lighting spectrum but also a full-spectrum lamp with preset lighting formulas provided by multiple companies. Therefore, the field cultivator can focus more on adjustment. Where feasible, no adjustments will be made to increase the density of cannabis cultivation or the bidding of biomass energy. The lighting showed that in the harvesting process, the output increased by more than 20% through simple dimming. Together with him, he has developed many succulent VANQ LED lighting systems. Generally, field cultivators choose LED systems to save energy costs. But due to lack, they quickly adopted this option, resulting in a decline in production. Realizing that power is factual power is an important factor for people to get rid of the troubles of LED grow light cannabis solutions.

The growing VANQ specially designed a new technology system for LED hemp cultivation, called GLXM LED. The lighting system that the company has already started is scheduled to be listed on a3i in the first quarter. At the same time, factory lighting will still be put into production in 2019. In the past decade, the cultivation of organic light-emitting diodes or OLED hemp has turned to LEDs. Methods They are very popular among cannabis distributors. The need to switch from LED to OLED is because OLED technology is superior to ordinary LED lighting systems in many ways. Why OLED technology only needs a total area of ​​only a few inches and the same light intensity as previous LED systems. Field cultivators can increase the growth of hemp, produce almost no or even no heat, which will greatly reduce the cost of using HVAC systems and save energy.

With the advent of these new lighting technologies, this amazing technology is a plus. The market has changed a lot, and it will greatly change the lifestyle of cannabis. The cultivation of the hemp industry has undergone tremendous changes during the growth process. In the coming year, innovations such as facilities and technology may become very popular. You look forward to trying these next cool lighting systems.

  

Comparative lighting of cannabis: sodium, LED and LEC systems

Today, we will show you the difference between the three main types of professional lighting for indoor crops. The comparison is based on an approximation of the cultivation standard of 600 watts per square meter. The first device used for this comparison is well known. This is a kit made of more than 600 kinds of high-pressure sodium, which has been in the crop market for a long time and is widely known. For comparison, we used a 600-watt ballast and hybrid bulb. These teams have been using this field for a long time.

 

This is why its price is cheaper than mine, but in fact, this is the only advantage. The remaining price is inconvenient for their electricity consumption or monthly electricity bills. Their power wattage is very low. We must change the lights every three seasons. The heat it emits is also annoying. The yield obtained using this sodium device is 0.8 g to 1 g. For this particular team, per watt of power, we can achieve 500 grams of output for each installed device. In this case, the second system in this comparison is the panel system. According to the manufacturer, this is 340W Led 600W.

 

So far, these LED panels have not been used in large quantities to reduce prices and improve the products of chip manufacturers, thus occupying the market for a long time. Using 1.4 watts per watt, ta output is 1.1, that is to say, using these characteristics of the panel, we will get about 400 grams of harvest. The team’s advantage is that it generates very little heat, does not actually generate heat, consumes less power, and has higher performance. Compared with traditional lamps, it hardly gets hot, which is why they are very suitable for air-conditioned and non-air-conditioned situations. Finally, we have the LEC system. The latest system on the market is the ceramic lamp, which is a development of the sodium system. In this case, we have a LEC system under the VANQ brand, whose ballasts and bulbs are manufactured by PHILIPS, which is the main driving force for this new technology in the market.

 

Since 2016, it has been sold on the Spanish market. These systems are more efficient and generate less heat. We can use the LEC system to get 1.6 to 1.8 grams of powder per watt, especially through the team, we can perceive 510 grams of dried flowers. The main advantage of LEC lighting equipment is that it generates very little heat, and the light generated can pass through plants through ultraviolet and infrared light in the spectrum. How many of you know that this is useful for producing more resin, and high-quality crops are very useful. In fact, the lamp is replaced every 6 or 7 crops, so the price is not high compared to high-quality sodium equipment.

 

The only drawback we found in this team is the price increase, because the only ballast and bulb manufacturer at the moment is Philips, for the rest of us, he will need to wear sunglasses or sunglasses to protect them from UV rays. These devices. He is clearly a comparator.

  

Hello, this is VANQ plant light. We have received many inquiries about plant lights and plant lights via email. These plant lights often ask the questions I want to answer. One problem is that my palm is different from the old palm.

Like a foot: Which led light is correct? Yes, this is about cool plants. If you need a plant light that can emit this light and red light at the same time, and also emit red light in a balanced manner, they need coordinated overall growth and may form beautiful flowers. For this, it should not only Only a balanced growth plant, we can complete it together with the staff. The question here is about another planet in the extra room. I am growing paprika and two small lemon trees. Now, I'm not sure which kind of lighting is suitable for the plants we explicitly use for harvesting, such as crops or crops such as pineapples, because these are basically the same as our green plants and show a balanced red and red color. Blue light, ultraviolet light, and infrared light. After that, other lights (such as blue, purple, crimson, or even orange) will have a positive impact on the crops, and anyone who has the opportunity should try it here.

This is a frequently asked question: How long should I irradiate plants every day? Do I need extra light to save the winter, so here, you must distinguish the purpose of plant lighting? If the plants outside in summer stand and stay healthy in winter. For the second spring, if you want to overcome this problem, it usually takes eight to nine hours of lighting time, but, for example, harvesting tomatoes and then requires twelve hours of lighting time, which is too bad.

The second part of the problem does not use the same light source for overwintering like all other applications. It is often asked how the optimal distance from plant light to plant is basically the same. Therefore, the distance must be selected so that the light of the whole plant is very high. It's good, but the natural light needs of different plants also play a role, which is why it's difficult in general. Some plants will grow in partial shade, and living plants must be considered in the desert, so you should always use a light close to the plants. The lighting distance from the plants is very small. If you are unsure, it usually starts from 20 cm and can reach up to two meters at the latest.

The contact information at the end of the article will disappear. For you, after you asked some questions about our LED plant light technology, you wrote the first 90 undpflanzs greeting group, these lights do not emit any relevant heat, why? With the help of fan cooling and its loud noise, how can I imagine that the right light in your home is not the LED chain in your garden or the light on the Christmas tree? This does not mean that fan cooling can extend the life and performance of the LED. In our GLMX and GLIC series, the cooling sound is clear and audible, comparable to standard desktop fans. The GT series has a so-called silent fan, which is comparable to PC fans in terms of noise generation. Diesel lamps are suitable for this. In principle, our plant lights are suitable for all rooms. In these rooms, the strong blue-red light and fan noise just mentioned is not a problem. Usually, people will go at night when there are no plants. There is still lighting, so it should be suitable for this sunny day. The light will be suitable for main application areas, such as greenhouses, winter gardens, cellars, and winter garages, as well as all imaginable planting spaces in the house.

One way or another, now we forget. Even though there is the last problem with using this technology in the attached greenhouse, the air humidity is still high. This is a problem, no, of course, it is not a problem. Even in our own nursery, we can use our plants to directly shine and spray water. In this case, there will always be high humidity. If your plants are in a greenhouse, please avoid seeing these open ventilation slots here, so use For plants watered with garden hoses, please read the original table that differs from the plant area. From my point of view, I hope I can remove some of the uncertainty to show that it is not as complicated as usually assumed. If you have other questions about the transplant lighting of our plant lights, we would like to get all the information.

  

Hello, welcome to the pea planting room. This is my pepper rack under the LED light. Now I have closed it, otherwise the pictures are all pink, but there are 13 different peppers on my rack, I think I just I only have one of Ithink from Ecuador. I got it from overseas seeds. For some reason, this is the only Ecuador that germinates. I just started farming last month, so I think the rest are as early as 11. Month began.

Others are in mid-December, but I have been picking flowers because I don’t want these flowers to produce flowers, because I want the concentration to increase, so you can see that there are many flowers on CajunBelle this special variety, so I need to study carefully Cut them off before they get bigger, some of them I have cut a little bit, others I just let them grow, but the long hair of Cajun Belle and the Italian makes them grow quite fast. After pairing with other varieties, I trim them once or twice, I also put some pepper here,

This is used under shop lights on t8 bulbs, these are the same varieties that I grow under LED lights, so I want to compare and show you what is the difference compared to those grown under LED lights, I know A lot of you want to watch a comparison video that shows the difference between peppers grown under LED lights and peppers grown under store lights. Here I have four different varieties of one of each variety grown under LED. The one that grows under the store light, so on the left is the one that grows under the store light. They look very similar. I don’t know if I can talk about it in the video, but the pepper in the store seems to have darker colored leaves. This is a California harvest. Machine, this is something I haven’t trimmed, so it’s a bit tall, but compared to some other varieties, it’s still very dense, and then I’m on the back, I have Brazilian starfish, this peculiar pruning, you can see that I trimmed The place that has been past is also trimmed here. It is also lighter than the one grown under the LED, but it grows again until the height is very similar, so there is no big difference in plant height. Now we turn to Aki lemon or lemon When it is lemon, its left side is darker, but some leaves are bent a bit, and my leaves under the LED light have no problem, so I am not sure what caused the leaves to curl, but I might add some fertilizer to it and see Does it help

Then I also have an orange bell pepper, so this one looks very similar, they are the same height, I also trimmed these two and marginalized them A month ago, they became a bit bushy and you can see some flowers start Formation, I need to cut it there, so this is a comparison, so there is not much difference, maybe a little lighter LED, but the height is similar, they all look healthy, the fertilizer I have been using is the harvest efficiency of this organic Neptune Wheat fertilizer, I just mix it with a gallon of water, maybe two teaspoons, I have been watering another thing I am on the shelf here, I have a small bowl with several bowls in it, here are Apple cider vinegar, this needs to be replaced, but the fungus is attracted by apple cider vinegar, so I have a few bowls, here is another one. Fungus is not good for your plants, so I did it, it seems to attract me, very good, hope it can help plants, so oh, I also want to mention that many people grow pepper in these solo cups so I want to try a bit,

You will see there are two solo cups here. What people did was they took the first cup, cut some fairly large holes in the bottom f, or pulled out the rhizomes, and then added water and nutrients to the bottom cup. The rhizomes stick out from the bottom without hovering in the pot, just like I'm sure many of them you can't see them, but if you take it out of the pot, take it out, you will find that there are many roots starting Coiling, causing the root system to take root, it is difficult for the plant to get nutrients, so what I am doing, if the plants look unhealthy, then what I am doing is pour them into a solo cup to see if it can help the plant to regain growth, you can still See more information here.

My luck with the sugar factory is not very good. I only have two sugar factories. They "are not the healthiest plants, so I put it in a separate cup, hoping that it can be restored to its original state, but you can see The leaves are very yellow, but they have just fallen off, but I hope they can return to their original shape after putting them in this container, so they look more beautiful. I also want to mention that many grown-up peppers grow out of these solo cups , So I think I’ll give it a try and you’ll see that there are two solo cups inside, what people do is they take the first cup and cut some pretty big holes in the bottom to let the roots come out, and then In the bottom cup, they add water and nutrients to the cup. This is the way to feed the plants. This allows the roots to stick out from the bottom instead of coiling in the pot, as I'm sure, many of them are not visible But if you take it out of the pot, you will find that there are a lot of roots that start to coil around, causing the root system to take root and it is difficult for the plant to get nutrients, so what I am doing is, if the plant starts to look unhealthy, then What I am doing is pour them into a Solo cup and see if it will help the plant to recover, you can see more of them here.

My luck with the sugar press is not very good, I only have two sugar squeezed plants, they are not the healthiest plants, so I put this one into Solocups, I hope it will recover, but you can see The leaves are very yellow, but they just fell off, but I hope they will recover after putting it in the container, so the pepper is very worthy of appreciation, I may post another update on Tomatosoon

For LED planting, I strongly recommend the LED grow light I bought. It is VANQ T8, which is very suitable for the spectrum required by seedlings and plants during growth. If you are interested, please click the link below:

https://www.vanqled.com/

  

Hi everyone, I did a little experiment here a few days ago and my corn cob arrived. Therefore, we recommend two of them, so my experiment is to use one and use household LED lights as a supplement. Only use this light.

Its power is 120 watts, which is very good because they are cool, do not consume a lot of power, and are very cheap. I only use the hemp LED grow light here because it doesn't have more, but I will get more. This clone is a Perps clone of Canuck Seed's second-generation grandparents.

It drove well. It has been flowering for 10 to 14 days. We made some very light lollipops at the bottom, without too many free radicals, so you know there is enough circulation of air and light. The purpose of these guys is to let light flow through the whole plant. This is a 4×4 tent. I think she will account for a lot. Just to give you some comparisons. This is one of the plants. Clone, the flowering period is very late, most of the time is used under VANQ CLTW050, plus these full spectrum lights, these lights are 50 watts LED bulbs, I have a bulb in every corner, their purpose is to make her full To bathe. You know, from her point of view, she is a bit malnourished, so some flower buds are so airy, but from now on, I will delete I give comb AG, which contains a small amount of nitrogen, and try to add salt.

You at least know the possibility of at least stopping the rotation, because you can see that it is not so dense at all, but within reach, she is a beautiful plant, I don’t have a purple fan, but it’s good, but you will see Until it is 1/10 the same as other signals. This is a late flower, so you can now know that the signal is much larger.

  

Good night, I am in the greenhouse now. We grow cucumbers here. 2 greenhouses. One cucumber and another tomato. Because Siberia has space. The plants are not mature yet, we are all in the greenhouse. We grow cucumbers in greenhouses and speed up the process. I made a germination explosive device that can be equipped with LEDs to stimulate plant growth.

What are they? I will post a separate video in the daytime sun, where you can see the crystal itself, how to fix the crystal, and how to connect it. Now we will show her this state from the outside. The house is powered by solar panels. The power of the small power plant is separated from 100 watts, so the 2 greenhouses are lit, lets see that we have an outlet. Therefore, the new battery level set on the device is different. I was discharged from the hospital.

Yes, it has a 113-volt battery box, which is not enough to withstand the load. Therefore, its tension is now too low. I will also rent power plants elsewhere. You like the idea of ​​video recording during the day. Put into use. You can write smart suggestions in the comments. For some reason, she lacked unity. When the sun has not yet set, it is not dark. About an hour, then the sun went down. If someone tells the user how to install the controller (or even lower), it will no longer give him a load switching threshold voltage of 10 to 9 volts, and everyone will stay there. Sleep, thank you all bye